Panasonic PT-RW630LWU 6500-Lumen WXGA Laser Light Source DLP Projector

Overview

The white Panasonic PT-RW630LWU 6500-Lumen WXGA Laser Light Source DLP Projector is a lamp-free WXGA projector that utilizes a filter-less design for 20,000 hours or more of 24/7/365 continuous and maintenance-free operation. With no lamp to replace, these projectors are designed for a more stable light output over a longer period of time. Projectors with lamps to replace will go through more frequent cycles of brightness and dimming, while the laser technology will remain steady and brilliant during the same period. The laser engine is fashioned such that if anything were to go wrong with a single laser module, the projector would continue operation at up to 93% brightness. The laser light engine delivers a 10,000:1 contrast ratio with near pure white. The full power of the projector is used to make color without giving up some of the power to produce white for brightness. It also offers an array of features, including edge blending, pixel mapping, horizontal / vertical / 360° rotational mounting, and geometry control. The laser light source combined with an onboard sensor enables accurate color and brightness control when blending two or more projectors over longer periods of time. The PT-RW630LWU will work with many 1-chip DLP lenses available from Panasonic, including the ultra short-throw ET-DLE030 lens. It also has three standard digital inputs including HDMI, DVI, and Digital link. DIGITAL LINK is based on the HDBaseT spec for delivering 1080p audio and video content over 328' of Cat6e cable, while Panasonic adds its control protocol for complete integration with many control and networking products in the industry.

 

Specifications

Model Number:  PT-RW630LWU

Brand:  Panasonic

Alt Part Number(s):  PT-RW630LWU

Product Type:  DLP Projector

 

Technical Description

Brand:  Panasonic

Model:  PT-RW630LWU

Display System:  -Chip 0.65 DLP

Native Resolution:  1280 x 800 (WXGA)

Supported Resolutions:  Maximum: 1280 x 800

Max Brightness:  6500 Lumens

Uniformity:  90%

Offset:  Not specified by manufacturer

Aspect Ratio:  16:10

Contrast Ratio:  10000:1

Dynamic Contrast Ratio:  Not specified by manufacturer

DLP Link 3D:  None

Supported 3D Formats:  None

Projection Size:  50 - 600" / 127.00 - 1524.00 cm

Keystone Correction:  Vertical: ± 40°

Picture-in-Picture:  Yes

Ceiling Mountable:  Yes

Rear Screen Projection:  Yes

Internal Memory:  None

Inputs/Outputs:  1x HDMI Video (Input), 1x DVI-D Video (Input), 1x 5-BNC Video (Input), 1x 15-Pin VGA Video (Input), 1x RS-232C Control (Input), 2x 9-pin VGA Control (Input), 2x M3 Control (Input), 1x Ethernet LAN (Input)

Wireless LAN:  None

Expected Lamp Life"  Medium Brightness:  20,000 Hours

Fan Noise:  Medium Brightness: 35 dB

Power Consumption Full Brightness:  720 W

Standby Mode (Lamp Off):  0.4 W

Standby Mode (Lamp Off):  4 W

Temperature Operating:  32 to 113°F (0 to 45°C)

Humidity:  10 - 80%

Dimensions (W x H x D):  19.6 x 7.9 x 21.2" / 498.0 x 200.0 x 538.0 mm

 

Features

6,500-lumen laser light source 1-chip DLP

10,000:1 contrast ratio

Approximately 20,000 hours of continuous operation during normal use

Lamp-free design allows for 24/7/365 continuous, maintenance-free operation

Supports custom applications such as edge blending, pixel mapping, and projection on curved surfaces from any mounting position (vertical, horizontal and / or tilting 360 degree projection)

Detail Clarity Processor gives clarity to fine details

System Daylight View enhances color perception, reducing the need to turn off the lights

Full 10-bit signal processing

Cooling system designed to maintain quiet, long-term, stable operation while keeping the exhaust heat low

Filter-less, dust-resistant structure with an airtight optical block to resist the effects of dust and other particles in the air

Multi-screen support system seamlessly connects multiple screens

Multi-unit brightness control function

Lens-centered design

Omnidirectional installation capability

DIGITAL LINK allows transmission of digital signals (HDMI, uncompressed HD video, and control signals) up to 328' with a single Cat5e cable or higher

The optional ET-YFB100G Digital Interface Box makes setup easy for ceiling-mounted and other permanent installations

Art-Net compatibility simplifies system integration

DVI-D and HDMI inputs

Multi Projector Monitoring and Control Software allow multiple projectors to be managed together over a wired LAN

Web browser control

Optional Early Warning Software ET-SWA100 Series compatible

Shutter function with fade in/out effect; processing time controllable between 0 and 10 second

PJLink compatible

Picture-in-picture function

Scheduling function

Optional ET-MWP100G Multi Window Processor for multi-screen solution

 

*Product descriptions, images, and part numbers are subject to change and may not accurately reflect manufacturer product alterations. For the latest and most precise information, kindly refer to the manufacturer's website and use the item's manufacturer part number.