Description
Overview
The 16-channel NV-16PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT‘s PVD™ transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load/no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.
Specifications
Model Number: NV-16PS13-PVD
Brand: Network Video Technologies
Alt Part Number(s): NV-16PS13-PVD
Product Type: Video Receiver Hub
Technical Description
Brand: Network Video Technologies
Model: NV-16PS13-PVD
UTP Input/Output Connector: x16
Video Connections: BNC x16
Power Input: 115 - 230VAC
Amperage: 1 Amp per channel
Frequency: 50/60 Hz
Power Output: 24VAC / Off / 28VAC (switchable)
Nominal Voltage: AC 120/230 V
Max Power Consumption: 500 W
Low Voltage Power: DC 24 V
Output Voltage: 208 - 230 V AC
Protocols: Web, SNMP, Telnet
Width: 17 in
Depth: 8.1 in
Height: 1.7 in
Features
Supplies 24VAC power while allowing video and telemetry signal pass-through
Independently selectable 24VAC - OFF - 28VAC with 1Amp per channel
Low profile design with high port density saves rack space (1RU high)
Transient and automatic reset fault protection
Diagnostic LEDs indicate load/no load, miswire and overload conditions
* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.
You may also like
Recently viewed
- Opens in a new window.