Cisco VWIC-2MFT-T1 Voice / WAN Card

"Image may differ from actual product"

Roll over image to zoom in Click on image to zoom

Overview

This module supports voice, data, and integrated voice/data applications. For data applications, the VWIC provides a dual-port WAN Interface Card (WIC) for T1/FT1 with an integrated DSU/CSU. For a packet voice solution, the VWIC provides a dual-port Voice Interface Card (VIC) with integrated DSU/CSU, that combines with the Digital T1/E1 Packet Voice Trunk Modules.

VWIC-2MFT-T1 Product Overview

Technical Information

Application/Usage: Voice

Interfaces/Ports

Interfaces/Ports: 2 x T1/FT1 WAN
Interfaces/Ports Details: 2 x RJ-48 T1/FT1 WAN

Media & Performance

Connectivity Media: Cable
Data Transfer Rate: 1.54 Mbps T1

Management & Protocols

Management: Telnet/Console:
Remote and local configuration, monitoring, and troubleshooting from Cisco IOS Command Line Interface
SNMP:
Router and DSU/CSU managed by single SNMP agent; router/DSU/CSU appear as single network entity to user
Standard MIB (MIB II)
Cisco integrated DSU/CSU MIB
RFC 1406 T1 MIB, including alarm detection and reporting
SNMP Traps:
Generated in response to alarms
Protocols: VoIP
Protocols: VoFR
Protocols: VoATM

Controls/Indicators

Status Indicators:
CD (Data Carrier Detect)
LP (loopback)
AL (Alarm)

Environmental Conditions

Temperature:
Temperature:
Humidity: 5% to 85% Non-condensing Relative Humidity Operating
Humidity: 5% to 95% Non-condensing Relative Humidity Storage

Physical Characteristics

Dimensions: 0.8" Height x 3.1" Width x 4.8" Depth
Weight (Approximate): 1.92 oz to 2.88 oz

Miscellaneous

Additional Information: Modular Router Solutions:
LAN-to-LAN Routing
Voice & Fax Integration
VPN & Firewall Solutions
Packet Voice Support:
The 2-port T1 Multiflex VWIC or 2-port Drop and Insert T1 Multiflex VWIC connect 1 to 48 DS0 channels (voice calls) to the Digital T1/E1 Packet Voice Trunk Module
Data Features:
T1/E1 or fractional T1/E1 network interface
N X 64 Kbps or N X 56 Kbps, nonchannelized data rates (T1:N=1 to 24, E1:n=1 to 31)
Standards based, including ANSI T1.403 and AT&T Publication 62411
T1 Network Interface:
Transmit Bit Rate: 1.544 Mbps +/- 50 bps/32 PPM
Receive Bit Rate: 1.544 Mbps +/- 50 bps/32 PPM
Line Code: AMI, B8ZS
AMI Ones Density: Enforced for N x 56 Kbps channels
Framing Format: D4 (SF) and ESF
Output level (LBO): 0, -7.5, or -15 dB
Input Level: +1dB0 down to -24 dB0
DTE Interface (WIC mode): Fractional Service
DTE Interface (VIC mode): G.704/structured
DCE Interface: G.704/structured
DSU/CSU:
Selectable DSX-1 cable length in increments from 0 to 655 feet in DSU mode)
Selectable DS1 CSU line build-out: 0, -7.5, -15, and -22.5 dB
Selectable DS1 CSU receiver gain: 26 or 36 dB
Comments:
VIC support in the Cisco 2600, 3620, 3640 and 3660 when used with a Cisco T1/E1 Packet Voice Trunk Module (NM-HDV-1T1-24, NM-HDV-1T1-24E, and NM-HDV-2T1-48). WIC support in the Cisco 2600 expansion slot. Future WIC support will be provided in the Cisco 3620, 3640 and 3660.
Compatibility: Supported Platforms & Minimum IOS Versions:
3745 - 12.2(8)T
3725 - 12.2(8)T
3660 series - 12.0(5)XK
3640 - 12.0(7)XK
3620 - 12.0(7)XK
2691 - 12.2(8)T1
2650 - 12.1(3)T
2600XM Series - 12.2(8)T1
2600 series - 12.0(5)XK
1720 - Not Supported
1600 series - Not Supported
Certifications & Standards: T1 Compliance (Partial List):
ANSI T1.403
US (UL 1950, T1)
FCC Part 68
CS-03
Canada (CSA 950, T1)
US (FCC Part 15 Class B, T1)
U.K. (BS6301, EN60950, EN41003)
Canada (CSA C108.8 Class A, T1)
Bellcore-AT&T Accunet (62411)
ATT 54016
Japan (VCCI Class 2, VCCI:V-3/97.04, T1, JATE Green Book, IEC950)

Warranty

Limited Warranty: 90

Product information, pricing, availability, images or discounts are subject to change without notice and may not always reflect the most current details. In the event of pricing or availability discrepancies, we reserve the right to cancel or adjust orders. Customers will be notified and may choose to proceed or cancel.