1-877-440-0256
"Image may differ from actual product"
Roll over image to zoom in Click on image to zoom
Crestron CP4 4-Series High‑Performance Rack-Mountable Control System
SPECIAL ORDER ITEM
This product is available for special order and may take longer to ship.
AVAILABILITY & SHIPPING
We’re happy to source this item specifically for you! While it may take a bit more time to arrive, we’ll keep you informed every step of the way. Shipping timelines can vary based on the manufacturer's fulfillment schedule.
NEED IT SOONER?
Contact us to explore expedited options or find a comparable in-stock alternative.
SPECIAL ORDER FULFILLMENT
Saitech Inc. partners with top-tier manufacturers and authorized distributors to fulfill special order requests — including hard-to-find, end-of-life, and build-to-order products. Our team ensures every special order is handled with precision, transparency, and dedicated support from start to finish.
- Overview
Overview
The CP4 is a secure, high‑performance control processor with a powerful 4-Series control engine. The CP4 is designed to integrate and automate technology within any modern networked home, commercial building, or government facility.
Specifications
Model Number: CP4
Brand: Crestron
Alt Part Number(s): CP4
Product Type: Control System
Specifications
Brand: Crestron
Model: CP4
Ethernet: 100/1000 Mbps, auto‑switching, auto‑negotiating, auto‑discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1xX, SNMP, BACnet™ and IP1, IPv4 or IPv6, Active Directory® service authentication, HTTPS web server, HTTPS web browser setup and XiO Cloud® client, SMTP email client
Cresnet Network: Cresnet master mode
USB: Supports USB mass storage class devices via the rear panel USB 2.0 host port, supports computer console via the front panel USB 2.0 device port
RS-232/422/485: For 2-way device control and monitoring, COM port supports RS‑232 up to 115.2k baud with software handshaking, one port also supports RS‑422 or RS‑485 and hardware handshaking
IR/Serial: Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0–5 V) up to 115.2k baud
SDRAM: 2 GB
Flash: 8 GB
Memory Card: Supports SD and SDHC cards up to 32 GB
RELAY OUTPUT 1–8: 8-pin 3.5 mm detachable terminal blocks; Comprises (8) normally open, isolated relays; Rated 1 A, 30 VAC/VDC; MOV arc suppression across contacts
I/O 1–8: 9-pin 3.5 mm detachable terminal block; Comprises (8) Versiport digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0–24 VDC, input impedance 20k Ω, logic threshold >3.125 V low/0 and <1.875 V high/1; Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with real world loads; Analog Input: Rated for 0–10 VDC, protected to 24 VDC maximum, input impedance 21k Ω with pull-up resistor disabled; Programmable 5 V, 2k Ω pull-up resistor per pin
COM 1: 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232/422/485 port;Up to 115.2k baud; hardware and software handshaking support
COM 2–3: 3-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232 ports; Up to 115.2k baud; software handshaking support
MEMORY: SD memory card slot; Accepts one SD or SDHC card up to 32 GB for storage of log files
USB: USB Type A connector, female;USB 2.0 port for storage devices
LAN: 8-pin RJ45 connector, female;100/1000Base-TX Ethernet port
NET: 4-pin 3.5 mm detachable terminal block; Cresnet master port; Outputs power to Cresnet devices only if the included power pack is connected to the 24 VDC power input jack;Alternately functions as a Cresnet power input to power the unit from a Cresnet power supply;
COMPUTER (front): USB Type B connector, female; USB 2.0 computer console port;
PWR: Green LED, indicates operating power is supplied from the power pack or Cresnet power supply
NET: Amber LED, indicates communication with Cresnet devices
MSG: Red LED, indicates control processor has generated an error message
HW-R: Recessed push button for hardware reset
SW-R: Recessed push button for software reset
Power Source Options: Power pack or Cresnet (connect only one)
Cresnet Power Usage: 15 W (0.625 A @ 24 VDC) when powered by a Cresnet power supply only
Available Cresnet Power: 24 W (1 A @ 24 VDC) when powered by the included power pack only
Power Consumption: 15 W (not including any connected Cresnet devices)
Output Voltage: 208 - 230 V AC
Protocols: Web, SNMP, Telnet
Height: 1.70” without feet
Width: 17.28”19.00 in. (483 mm) with rack ears
Depth: 6.56”
*
Product information, pricing, availability, images or discounts are subject to change without notice and may not always reflect the most current details. In the event of pricing or availability discrepancies, we reserve the right to cancel or adjust orders. Customers will be notified and may choose to proceed or cancel.
