Cisco WIC-1DSU-T1-V2 1 x T1/FT1 1-Port WAN Interface Card
SPECIAL ORDER ITEM
This product is available for special order and may take longer to ship.
AVAILABILITY & SHIPPING
We source this item directly from the OEM as a special order, which may result in longer lead times. We’ll keep you updated throughout the process.
NEED IT SOONER?
Contact us to explore expedited options or find a comparable in-stock alternative.
SPECIAL ORDER FULFILLMENT
Saitech Inc. sources special orders directly from manufacturers and authorized distributors, including hard-to-find, end-of-life, and build-to-order products. These items may have longer lead times, and our team will keep you informed throughout the process.
- Overview
The updated Cisco T1 data service unit/channel service unit (DSU/CSU) WAN Interface Card (WIC) is an integrated, fully managed DSU/CSU for T1 or fractional T1 service. The WIC-1DSU-T1-V2 is an updated version of the WIC-1DSU-T1, offering additional supported features with the same performance
- Application/Usage: Wide Area Network
Technical Information
- Interfaces/Ports: 1 x T1/FT1 WAN
- Interfaces/Ports Details: 1 x RJ-45 T1/FT1 WAN
Interfaces/Ports
- Data Transfer Rate: 56 Kbps to 64 Kbps Fast Ethernet
- Data Transfer Rate: 1.54 Mbps FT1
Media & Performance
- Management:
-
Full management features:
- Configuration - Capability for remote configuration via Telnet from Cisco IOS CLI.
- Monitoring - Router and DSU/CSU are manageable as a single SNMP entity; extensive DSU/CSU statistics are provided by the Cisco IOS CLI.
- Troubleshooting - Extensive loopbacks (including manual button for network line loopback), bit error rate tester (BERT) test patterns, alarm counters, and performance reports, all of which are accessible from Cisco IOS CLI. LEDs for carrier detect, loopback, and alarm functions.
- Convenient Telnet or Secure Shell (SSH) Protocol connection to the router eliminates the need for out-of-band management of external DSUs/CSUs
- Protocols: HDLC
Management & Protocols
- Status Indicators:
-
LEDs:
- CD (data carrier detect)
- LP (loopback)
- AL (alarm)
Controls/Indicators
- Temperature:
- Temperature:
- Humidity: 10% to 85% Non-condensing Operating
- Humidity: 5% to 95% Non-condensing Non-operating
Environmental Conditions
- Dimensions: 0.8" Height x 3.1" Width x 4.8" Depth
- Weight (Approximate): 2.24 oz
Physical Characteristics
- Package Contents:
- 1-Port T1/Fractional T1 DSU/CSU WAN Interface Card: Ver. 2
- 3745 - 12.3(1)
- 2600XM Series - 12.2(16)
- 1760 - 12.2(15)ZL
- 1751 - 12.2(15)ZL
- 1721 - 12.2(15)ZL
- Additional Information:
-
Benefits of an Integrated, Fully Managed Solution:
- Reduced Deployment, Management Time, and Costs:
- Flexibility and Investment Protection
- Single-Vendor Support
- Enhanced Reliability
- Consistency with WIC-1DSU-T1:
- Wet T1 Capable
- Short Cable Length Command
- Network Equipment Building Standards (NEBS)
- Reduced Deployment, Management Time, and Costs:
-
Line code:
- AMI
- B8ZS
-
AMI ones density
- Forced/bit robbing (N X56)
- High-Level Data Link Control (HDLC) data inversion (N X64)
-
Framing format:
- D4 (SF)
- ESF
-
Output level (LBO) [dB0?]:
- 0 dB
- -7.5 dB
- -15 dB
-
Input level:
- +1 dB0 to -24 dB0
-
Diagnostics:
- Loopbacks:
- Network line loopback; user initiated
- Recessed push button for network line loopback; toggle on/off
- Network line loopback; telco initiated
- Network payload loopback
- Local date terminal equipment (DTE) loopback
- Remote line and payload loopback (codes: V.54 loop up, and loop down)
- Self-test:
- Self-test activated by user
- Test patterns (BERT):
- 1:2, 1:5, 1:8, 3:24, QRW, All 0s, All 1s, user-programmable 24-bit patterns
- Network (T1) alarms:
- Loss of network signal (red alarm)
- Loss of network frame (blue alarm) (AIS) from network
- Receive (yellow alarm) from network [UNCLEAR]
- Performance reports and error counters:
- Cyclic redundancy check (CRC)
- Bipolar violation (BPV)
- OOF [EXPAND?]
- Errored seconds
- Burst errored seconds
- Severely errored seconds
- Ft and Fs framing errors for SF framing
- FPS [EXPAND?] framing errors for ESF framing
- 24-hour history stored in 15-minute increments
- Loopbacks:
-
SNMP Traps:
- Generated in response to alarms
- Compatibility:
- Router families supported 1700, 2600XMs, 2691, 3631, 3725, 3745, and ICS 7750
- Cisco 1701, 1710, 1711, and 1712 are fixed-configuration routers and do not support the WIC-1DSU-T1-V2. Also, the Cisco 1750 does not support this WIC
- Certifications & Standards:
-
Regulatory Compliance:
- FCC Part 15 Class B
- TIA/EIA-IS-968
- Industry Canada CS-03 Part II
- JATE Digital
- CAN/CSA-C22.2 No. 60950-00
- UL 60950-2000
- IEC/EN 60950
- TS001
- AS/NZS 3260
- NEBS Type I/III
-
Standards:
- AT&T Pub 62411
- ANSI T1.403
- Standard MIB (MIB II)
- Cisco integrated DSU/CSU MIB
- RFC 1406
Miscellaneous
- Limited Warranty: 90
Warranty
Product information, pricing, availability, images or discounts are subject to change without notice and may not always reflect the most current details. In the event of pricing or availability discrepancies, we reserve the right to cancel or adjust orders. Customers will be notified and may choose to proceed or cancel.
