Description
The Emulex LP10000DC-M2 host bus adapters offers highly integrated 2Gb/s Fibre Channel to PCI/PCI-X connectivity solutions for enterprise-class storage area networks. The LP10000DC-M2 HBAs deliver exceptional performance through the use of Thor, Emulex's sixth generation Fibre Channel controller. The Thor high performance controller is a dual channel device that combines ARM9 microprocessors, 1Gig/2Gig SERDES, and an advanced Fibre Channel protocol engine into a single module.
LP10000DC-M2 Product Overview
- Ports/Channels: 2 x LC Fibre Channel
- Host Interface: PCI-X 133 MHz
- Host Interface: PCI-X 100 MHz
- Host Interface: PCI-X 66 MHz
- Backward Compatibility: PCI 66 MHz 64-bit
- Backward Compatibility: PCI 33 MHz 32-bit
- Topology: Arbitrated Loop
- Topology: Switched Fabric
- Fibre Channel Class Supported: Class 2
- Fibre Channel Class Supported: Class 3
Technical Information
- Connectivity Media: 50/125 µm Multi-mode Optical Fiber Fibre Channel
- Connectivity Media: 62.5/125 µm Multi-mode Optical Fiber Fibre Channel
- Data Transfer Rate: 1.06 Gbps
- Data Transfer Rate: 2.13 Gbps
- Distance Supported: 984.25 ft 50/125 µm Multi-mode Optical Fiber @ 2 Gbps
- Distance Supported: 492.13 ft 62.5/125 µm Multi-mode Optical Fiber @ 2 Gbps
Media & Performance
- Protocols: FC-FCP2
- Protocols: FC-FS
- Protocols: FC-PH
- Protocols: FC-PI
- Protocols: FC-FCP
- Protocols: FC-AL
- Protocols: FC-PLDA
- Protocols: FC-MI
- Protocols: FC-FLA
- Protocols: SCSI
- Protocols: TCP/IP
- Management:
- HBA Management Suite: HBAnyware
Management & Protocols
- Input Voltage: 3.3 V DC
- Input Voltage: 5 V DC
- Power Consumption: 9.10 W Typical @ 66 MHz
- Power Consumption: 12.90 W Maximum @ 66 MHz
- Power Consumption: 10.10 W Typical @ 100 MHz
- Power Consumption: 14.40 W Maximum @ 100 MHz
- Power Consumption: 10.10 W Typical @ 133 MHz
- Power Consumption: 14.40 W Maximum @ 133 MHz
Power Description
- Temperature:
- Temperature:
- Humidity: 5% to 95% Non-condensing Relative Humidity
Environmental Conditions
- Form Factor: Low-profile MD2 Hot-swappable
- Height: 2.5"
- Width: 6.6"
Physical Characteristics
- Additional Information:
- Airflow Required: 100 lf/m
- Quad Data Rate (QDR) SRAM Unified Data Buffer and Code Space memory
- Full fabric support with automatic topology and speed adaptation
- cHBA API support (FC-MI)
- Simplified SAN Management
- Onboard hardware context cache
- Superior fabric support and high transaction performance
- Support for use of multiple concurrent protocols
- End-to-end parity protection for high data integrity
- Large on card data buffer supports over 50km cabling at full 2Gb/s bandwidth
- Emulex LightPulse Technology
- 64+ Buffer-to-Buffer Credits supported
- Onboard 2K+ Contexts Cached
- 3.3V signaling
- 5V tolerant
- Bracket Type: Standard Bracket
- Use Thor, Emulex's sixth generation Fibre Channel Controller
- x86, Itanium (BootBIOS and EFI)
- Unix OpenBoot
- Compatibility:
- Windows Server 2003
- Windows 2000
- Windows NT
- HP-UX
- NetWare
- Linux (open build and open source)
- Solaris
- OEM Custom Drivers
- x86
- Intel Itanium
- SPARC PCI hardware platforms
- PowerPC PCI hardware platforms
- Certifications & Standards:
- IETF IP over FC
- PCI-X 1.0a
- PCI 2.3
- Class 1 Laser Product per DHHS 21CFR (J) & EN60825
- UL recognized to UL 1950
- CUR recognized to CSA22.2, No. 950
- TUV certified to EN60950
- FCC rules, Part 15, Class A
- ICES-003, Class A
- EMC Directive 89/336/EEC (CE Mark)
- EN55022, Class A
- EN55024
- Australian EMC Framework (C-Tick Mark)
- AS/NZS 3548, Class A
- VCCI, Class A
- MIC (Korea), Class A
- BSMI (Taiwan), Class A
Miscellaneous
Simultaneous Remote Boot Support:
Hardware:
Agency Approvals:
- Limited Warranty: 3 Year
Warranty
You may also like
Recently viewed
- Opens in a new window.