Description
Overview
The Pelco ALM2064 is an alarm interface unit that accepts external sensors to activate an alarm on the Pelco CM6800 series matrix switcher. Up to sixty-four external alarm sensors can be connected directly to this unit, with support for normally open (N.O.) or normally closed (N.C.) contacts. In addition to its alarm inputs, this unit features a single relay output to activate a device from the switcher following an alarm event.
Specifications
Mfr Part Number: ALM2064
Brand: Pelco
Model Number: ALM2064
Type: Alarm Interface Unit
Technical Description
Brand: Pelco
Model: ALM2064
Number of Alarms: 64
Input: RS-485, RJ-45 connector Baud rate selected with DIP switch
Output: RS-485, RJ-45 connector Baud rate selected with DIP switch
Indicators: Two power LEDs, green One alarm LED, red
Power: 3-wire, 18 AWG
RS-485: Two RJ-45 connectors
Relay Out: One 3-pin header with mating plug
Voltage: 100 ~ 240 V
Rack Mount: 1 RU wide x 1 RU high
Power Consumption: 30 VA
Output Voltage: 208 - 230 V AC
Protocols: Web, SNMP, Telnet
Width: 19 In
Height: 1.8 In
Depth: 8.2 In
Features
64 Alarm Contact Inputs
Connects to the CM6800 Series Matrix Swtichers Using Pelco’s M Protocol
Uses RS-485 Communication Interface
Multiple Units May be Cascaded to Provide Multiple Alarm Contact Points on a Single M Port Connection
Alarm Inputs May be Configured for Supervised or Unsupervised Mode
Supports Imports From Normally Open (N.O.) or Normally Closed (N.C.) Contacts
Powered by an Auto-Ranging Power Supply
* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.
