Description
The Aironet 1240AG IEEE 802.11a/g Non-modular LWAPP Access Point delivers the versatility, high capacity, security, and enterpriseclass features demanded by WLAN customers. These IEEE 802.11a/b/g access point is designed specifically for challenging RF environments such as factories, warehouses, and large retail establishments that require the antenna versatility associated with connectorized antennas, a rugged metal enclosure, and a broad operating temperature range.
The Aironet 1240AG IEEE 802.11a/g Non-modular LWAPP Access Point works in conjunction with Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS). It can automatically detect the best-available Cisco wireless LAN controller and download appropriate policies and configuration information with no manual intervention. Autonomous access points are based on Cisco IOS Software and may optionally operate with the Cisco Works Wireless LAN Solution Engine (WLSE).
- Wi-Fi Standard: IEEE 802.11a/b/g
- ISM Band: Yes
- UNII Band: Yes
- ISM Minimum Frequency: 2.41 GHz
- ISM Maximum Frequency: 2.40 GHz
- UNII Minimum Frequency: 5.15 GHz
- UNII Maximum Frequency: 5 GHz
- Number of Antennas: 4
- Antenna Gain: 2.2 dBi
- Antenna Gain: 3.5 dBi
- Antenna Type: Diversity Dipole Antenna
- Antenna Type: Omnidirectional Antenna
- Antenna Connector: RP-TNC Connector
- Indoor Antenna Range: 460 ft
- Outdoor Antenna Range: 950 ft
- Wireless Transmission Speed: 108 Mbps
- Wireless Security:
- WPA
- WPA2 (802.11i)
- Cisco message integrity check (MIC)
- IEEE 802.11 WEP keys of 40 bits and 128 bits
- EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
- Protected EAP-Generic Token Card (PEAP-GTC)
- PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP)
- EAP-Transport Layer Security (EAP-TLS)
- EAP-Tunneled TLS (EAP-TTLS)
- EAP-Subscriber Identity Module (EAP-SIM)
- AES-CCMP encryption (WPA2)
- TKIP (WPA)
- WPA TKIP
- IEEE 802.11 WEP keys of 40 bits and 128 bits
Technical Information
- Fast Ethernet Port: Yes
- Number of Network (RJ-45) Ports: 1
Interfaces/Ports
- Input Voltage: 110 V AC
- Input Voltage: 220 V AC
- Power Source: Power Supply
Power Description
- Form Factor: Wall Mountable
- Height: 1.1"
- Depth: 8.5"
- Weight (Approximate): 2.00 lb
Physical Characteristics
- Package Contents:
- Aironet 1240AG IEEE 802.11a/g Non-modular LWAPP Access Point
- Mounting hardware kit
- Quick Start Guide: Cisco Aironet 1240AG Series Access Point
- Safety Warnings for Cisco Aironet 1240AG Series Access Points
- Cisco product registration and Cisco documentation feedback cards
Mounting plate:
- Cable security bracket
- 2 x suspended ceiling T-rail clips (accommodates standard and recessed T-rails)
- 1 x security hasp
- 4 x (6 x 32 x ½ inches) pan head Phillips machine screws
- 1 x (8 x 18 x ¾ inches) pan head Phillips sheet metal screws
- 2 x No. 8 plastic wall anchors
- 1 x (10 x 24) nut (for ground stud on mounting bracket)
- 4 x rubber foot pads
- 2 x cable tie wraps
-
Additional Information:
Antenna Connectors:
- 2.4 GHz: Dual RP-TNC connectors
- 5 GHz: Dual RP-TNC connectors
- Certifications & Standards:
- Wi-fi
- UL 60950-1
- CAN/CSA-C22.2 No. 60950-1
- UL 2043
- IEC 60950-1
- EN 60950-1
- NIST FIPS
Radio approvals:
- FCC Part 15.247, 15.407
- RSS-210 (Canada)
- EMI and susceptibility (Class B)
- ICES-003 (Canada)
Security:
- IEEE 802.11i, WPA2, WPA
- IEEE 802.1X
- AES, TKIP
Other:
- IEEE 802.11a
- IEEE 802.11b
- IEEE 802.11g
- FCC
- RSS-102
Miscellaneous
- Limited Warranty: 1 Year
Warranty
You may also like
Recently viewed
- Opens in a new window.